 |
 |
 |
|
The VIVOTEK FD7131 is a full-featured 3-axis fixed dome network camera, designed for indoor surveillance. It comes with a wide-angle, vari-focal lens, allowing you to have a wide open view for maximum coverage.
- System -
- CPU: VVTK-1000 SoC
- Flash: 8MB
- RAM: 64MB
- Embedded OS: Linux 2.4
-
- Lens -
- Vari-focal board lens, f=2mm~4mm, F1.4~1.8, focus range: 50cm to infinity
-
- Angle of view -
- 105.1 ° ~ 53.2 ° (horizontal)
- 77.4 ° ~ 39.8 ° (vertical)
-
- Shutter Time - 1/5 sec. to 1/15000 sec.
-
- Image Sensor - MICRON 1/4” CMOS sensor with VGA resolution
-
- Minimum Illumination - 1.5 Lux / F1.4
-
- Video -
- Compression: MJPEG & MPEG-4
- Streaming: Simultaneous dual-stream
- MPEG-4 streaming over UDP, TCP, or HTTP
- MPEG-4 multicast streaming
- MJPEG streaming over HTTP
- Supports 3GPP mobile surveillance
- Frame rates: 640x480 up to 30fps
-
- Image settings -
- Adjustable image size, quality, and bit rate
- Time stamp and text caption overlay
- Flip & mirror
- Configurable brightness, contrast, saturation, sharpness, and white balance
- AGC, AWB, AES
- Supports privacy masks
-
- Audio -
- Compression:GSM-AMR speech encoding, bit rate: 4.75 kbps to 12.2 kbps
- MPEG-4 AAC audio encoding, bit rate: 16 kbps to 128 kbps
- Built-in microphone
- External microphone input
- Supports two-way audio by SIP protocol (*)
- Supports audio mute
-
- Networking -
- 10/100 Mbps Ethernet, RJ-45
- Protocols: IPv4, TCP/IP, HTTP, UPnP, RTSP/RTP/ RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, and PPPoE
-
- Alarm and Event Management -
- Triple-window video motion detection
- One D/I and one D/O for external sensor and alarm
- Passive infrared sensor (PIR) for human detection
- White-light illuminators for low light condition when event triggered
- Event notification using HTTP, SMTP, or FTP
-
- Security -
- Triple-level user access with password protection
- IP address filtering
-
- Users - Camera live viewing for up to 10 clients
-
- Dimension (including lens) - 143mm (D) x 106mm (H)
-
- LED Indicator - System power and status indicator; System activity and network link indicator
-
- Power - 12V DC; Consumption: Max 3.6W; 802.3af compliant Power over Ethernet
-
- Approvals - CE, FCC, VCCI, C-Tick
-
- Operating Environments -
- Temperature: 0 ° ~ 55 ° C
- Humidity: 20 % ~ 80 % RH
-
- Viewing System Requirements -
- OS: Microsoft Windows 2000/XP/Vista
- Browser: Internet Explorer 6.x or above
- Cellphone: 3GPP player
- Real Player:10.5 or above
- Quick Time: 6.5 or above
- Packet Video Player: 3.0 or above
-
- Installation, Management, and Maintenance -
- 3-axis mechanism for flexible ceiling and wall mount installation
- Installation Wizard 2
- 16-CH recording software
- Supports firmware upgrade
-
- Applications - SDK available for application development and system integration
-
- What's Included -
- FD7131
- Alignment Sticker
- Screwdriver
- Screws and I/O Connector
- Power Adapter
- Software CD
- Warranty Card
- Quick Guide
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 3-axis Mechanical Design to Adjust Lens Position for Ceiling and Wall Mount Installation
- Wide Angle Vari-focal Board Lens
- Built-in PIR Sensor for Motion Detection
- Built-in White Light LEDs for Illumination
- Real-time MPEG-4 and MJPEG Compression (Dual Codec)
- Supports Simultaneous Dual Streams (MJPEG/MPEG-4 up to 30fps in VGA Resolution)
- Supports 3GPP Mobile Surveillance
- Built-in 802.3af compliant PoE (Power over Ethernet)
- Supports Two-way Audio (*)
- Free-bundled 16-CH Recording Software
|
|
|
|
|
|
|
|
|
