 |
 |
 |
|
The NSR1200 is one of the three models of the NSR1000 series recording servers, with physical storage capacity of 2TB. The key concepts of the NSR1200 are a “hybrid” capability – supporting both legacy analog and current IP cameras, and both Full HD/SD cameras/displays – an open-platform design, and ease of setup and operation. The NSR1200 supports up to 64 units of IP/analog cameras in total. With the optional NSBK-A16, up to 16 analog cameras can be connected. The NSR1200 can be also used with up to seven units of the NSRE-S200 (2 TB Hard Disk Storage Device), allowing for the addition of 14GB storage capacity. With the NSR1200, you can open the door to a world of new possibilities in video surveillance.
- * * Model Number - NSR1200
- * * Number of Cameras Supported (IP/Analog Total) - Max. 64
- * * Analog Camera Input - Option (NSBK-A16)
- * * Video Compression (IP-Camera) - MPEG-4 or JPEG
- * * Video Compression (Analog-Camera) - n/a
- * * Maximum Recording Rate - 480 fps
- * * Hard Disk Drives (Physical Capacity) - 2000 GB (500 GB x4)
- * * Hard Disk Drives (RAID Level) - RAID 5
- * * Hard Disk Drives (Recording Capacity) - 1366 GB
- * * Expansion Storage - Supports NSRE-S200 (2000 GB) (Max. 7 Units)
- * * Monitor Out #1 - HDMI (A-type) x1, D-sub 15pin x1 (Front) or D-sub 15pin x1 (Rear).
- * * Monitor Out #2 - HDMI (A-type) x1, D-sub 15pin x1.
- * * Line Out - RCA-pin, L/R x1 stereo pair
- * * Sensor In - 8-channel photo-coupler (DC3.3-24 V)
- * * Alarm Out - 8-channel relay (Max. 24 V 1 A)
- * * Ethernet - 1000Base-T/100Base-TX/10Base-T x 4 (Auto switching)
- * * USB 2.0 - x3 (Front), x3 (Rear)
- * * Serial Interface (for UPS) - RS-232C x1
- * * Serial Interface (for Analog Camera Control) - RS-232C x1, RS-422/485 x1 (Either one to be selected)
- * * SAS 1.1 (Serial Attached SCSI) - SFF-8088 type x1
- * * Dimensions (W x H x D) - 17 x 3 1/2 x 16 1/2 inches (430 mm x 87 mm x 417 mm) (exclusive projections)
- * * Weight - Approx. 29 lb 12 oz (13.5 kg)
- * * Power Requirements - 100 V to 127 V/200 V to 240 V AC (50/60 Hz)
- * * Power Consumption - 265 W (typical)
- * * Operating Temperature - 41 to 104 ºF (5 to 40 ºC)
- * * Operating Humidity - 10 to 80% (Max. wet-bulb temperature 30 °C, non-condensing)
- * * Supplied Accessories - Analog Camera Cable x1 (NSR-1050H Only), Front panel key x2, Rubber Feet x4, Recovery CD x1, Manual/Tool/Source Codes CD x1
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- * * Hybrid recording (Analog/IP, SD/HD)
- * * Open platform (Supports IP cameras of some other brands)
- * * Easy setup and intuitive operation
- * * Max. 64 cameras supported (IP/Analog total)
- * * Max. 16 analog cameras connection (with an optional NSBK-A16)
- * * 2 TB Physical Storage Capacity
- * * RAID 5
- * * HDMI outputs for Full HD displays
- * * Supports megapixel cameras
- * * Additional storage of optional NSRE-S200 (2 TB) x 7 units
- * * Remote viewing by controller software (supplied)
- * * Light Funnel Control
- * * Flexible user management
|
|
|
|
|
|
|
|
|
